Data di Pubblicazione:
2012
Abstract:
A LuAG shaped rod crystal, doped with Yb3+, has been grown by μ-PD technique. The crystal diameter was about 3 mm and the length around 130 mm. A complete spectroscopic investigation in the temperature range 10–300 K is reported and data has been utilized to model the laser behavior. In the laser experiment
the Yb:LuAG sample was placed in an X cavity and pumped longitudinally obtaining an efficient CW laser emission. The Yb:LuAG laser yielded a maximum output power of 23 mW with a slope efficiency of 32% and a threshold around 35 mW, at lasing wavelength of 1030 nm. No significant depolarization effects
were observed, indicating a crystal growth with negligible stress. The output beam profile was investigated, yielding M2≈1.0 in both directions, further confirming the good optical quality of the sample.
the Yb:LuAG sample was placed in an X cavity and pumped longitudinally obtaining an efficient CW laser emission. The Yb:LuAG laser yielded a maximum output power of 23 mW with a slope efficiency of 32% and a threshold around 35 mW, at lasing wavelength of 1030 nm. No significant depolarization effects
were observed, indicating a crystal growth with negligible stress. The output beam profile was investigated, yielding M2≈1.0 in both directions, further confirming the good optical quality of the sample.
Tipologia CRIS:
1.1 Articolo in rivista
Keywords:
LASER MATERIALS; DIODE PUMPING; CRYSTAL GROWTH; CRYSTAL FIBERS
Elenco autori:
S., Veronesi; Y., Zhang; M., Tonelli; Agnesi, Antoniangelo; Greborio, Alessandro; Pirzio, Federico; Reali, Giancarlo
Link alla scheda completa:
Pubblicato in: